Industrial Dust Collection
Six families — cartridge, baghouse, cyclone, angled-cartridge, explosion-proof and stainless — covering grinding, cutting, welding, charging and crushing duties from 720 to 18,000 m³/h, delivered as complete central dust systems.
CDC Series Cartridge Dust Collector
Downdraft design, PTFE-membrane media
Air drops down before rising into the cartridges, so coarse dust falls out first. Pressure drop is lower than conventional bodies and pulse cleaning is more complete. Media is PTFE-membrane polyester, available anti-static, flame-retardant and oil/water-repellent.
- Downdraft plenum — lower ΔP, longer cartridge life
- PTFE membrane on polyester; anti-static, FR and repellent options
- Standardised series production, short lead time
- Online pulse cleaning with sequenced control
- Single units through full central systems
| Design | Downdraft cartridge collector |
|---|---|
| Media | PTFE-membrane polyester |
| Cleaning | Pulse-jet, online or offline |
| Application | Standalone, parallel, central |
| Supply | Series production, short lead time |
BDC Series Baghouse Dust Collector
Modular casing, pleated bags
Standard modular baghouse. Pleated bags replace round bags and save around 40% of floor area at the same filtering surface, with nano-finished media giving better efficiency and release behaviour.
- Pleated bags instead of round — about 40% less floor space
- Modular sections add or drop to match air volume
- Nano-finished media with anti-static, FR, repellent options
- Handles complex dust and conveying duties
| Build | Standard modular baghouse |
|---|---|
| Bag type | Pleated bags (replacing round) |
| Footprint | About 40% less space at equal area |
| Media | Nano-finished |
| Options | Anti-static / flame-retardant / repellent |
Mobile Cyclone Dust Collector
720–18,000 m³/h
Centugal separation with no media and no wearing parts — made for coarse, heavy dust from grinding, cutting, engraving and crushing, and used as the pre-stage of central systems.
- No media, no wearing parts, very low running cost
- 720–18,000 m³/h, from standalone to system
- Mobile body, placed wherever the work is
- Pre-sep before baghouse or cartridge, easing downstream load
| Air volume | 720–18000 m³/h |
|---|---|
| Principle | Centrifugal (cyclone) separation |
| Wear parts | None — no media, no wear parts |
| Build | Mobile standalone / system pre-stage |
KA T8-A Angled Cartridge Collector
For laser, plasma cutting and grinding
Angled cartridges drop out for fast change. A high-static fan of French design and a bottom-mounted quiet fan of German design drive the unit. A pressure chip samples 20 times a second, PT temperature control and a plate flame arrester guard against cutting sparks, and the display runs in six languages.
- High-static fan (French design) plus quiet bottom fan (German design)
- Pressure chip sampling 20×/s, cleaning on demand
- PT temperature control and plate flame arrester against sparks
- Display in Chinese, English, German, Japanese, Korean, Russian
- Angled cartridges change without tools
| Model | KA T8-A |
|---|---|
| Cartridges | Angled, tool-free change |
| Fan | French high-static + German quiet bottom |
| Monitoring | Pressure chip, 20 samples/s |
| Safety | PT control + plate flame arrester |
| Languages | ZH / EN / DE / JA / KO / RU |
Explosion-Proof Dust Collector
Venting, isolation, suppression and containment + anti-static
For reactive metal dust (aluminium, magnesium, titanium) and combustible organics such as flour and wood. Explosion components meet ATEX, the body is reinforced and validated by FEA, with anti-static membrane cartridges, seam-welded ducting and PLC monitoring.
- Four barriers: venting, isolation, suppression, containment
- Explosion components to ATEX
- Reinforced body verified by finite-element analysis
- Anti-static membrane media and seam-welded duct
- PLC monitors temperature, ΔP, velocity and concentration
| Venting | Vent panels and ducting |
|---|---|
| Isolation | Isolation valves stop flame transfer |
| Suppression | High-speed suppression |
| Containment | Reinforced body verified by FEA |
| Anti-static | Anti-static media and bonding |
| Monitoring | PLC on temperature, ΔP, velocity, concentration |
| Standard | ATEX-compliant components |
Stainless Steel Dust Collector
Available across all series
Carbon steel fails fast on corrosive gas streams. Stainless bodies resist corrosion and oxidation and are custom-built across the whole range; flue gas must stay above dew point.
- Resists corrosion and oxidation in aggressive media
- Custom across cartridge, baghouse and wet series
- Smooth surfaces meet hygienic industry requirements
- Run above dew point to prevent condensation attack
| Material | Stainless, grade selected to the medium |
|---|---|
| Duty | Corrosive dust-laden gas and flue gas |
| Condition | Flue gas above dew point |
| Customisation | Whole series, custom built |