MF Series Mechanical Oil Mist Collector
M500-VL / M2000-V / M8000-V, modular 800–50,000 m³/h
Designed for fine mist created by high-pressure coolant and evaporation in turning, milling, drilling and grinding. Imported self-cleaning composite glass-fibre media gives high efficiency, low resistance and long service life, and the cleaned air can be discharged straight back into the workshop.
- Self-cleaning composite glass-fibre media, modified for faster oil drainage and slower pressure rise
- Modular design, any air volume between 800 and 50,000 m³/h
- Four stages: cyclonic separator → stainless wire mesh → steel/textile mix → F9 oil-resistant filter
- 99.9% efficiency to German DIN 24185
- Filter and fan sections in one housing — lower noise, smaller footprint
- IE2 motor; HEPA or carbon after-stage available
| Model | M500-VL |
|---|---|
| Air volume | 500 m³/h |
| Power | 0.55 kW |
| Voltage | 3~380 V / 50 Hz |
| Dimensions | Φ350 × 550 mm |
| Noise | 65 dB(A) |
| Filtration fineness | 0.3–10 μm |
| Efficiency | 95% (≥95% at 0.3 μm) |
| Stages | Two-stage |
| Weight | 30 kg |
| Inlet concentration | <20 mg/m³ low-concentration cutting oil |
| Mounting | On machine roof or side bracket |
| Air volume | 2000 m³/h ／ 8000 m³/h |
|---|---|
| Power | 2.2 kW ／ — |
| Voltage | 3~380 V / 50 Hz |
| Dimensions | 720×780×2020 mm ／ 1400×1390×1600 mm |
| Noise | 74 dB(A) ／ 76 dB(A) |
| Filtration fineness | 0.3–10 μm |
| Efficiency | 99.9% ／ ≥97% at 0.3 μm |
| Stages | Four-stage (HEPA optional) / two-stage |
| Weight | 252 kg ／ 472 kg |
| Inlet concentration | <400 mg/m³ ／ <20 mg/m³ |
| Mounting | Floor standing, recirculated indoors |
EF Series Electrostatic Precipitator
EF500 / EF1000 / EF1800 / EF2200 / EF3500
Ionisation and collection plates capture particles down to 0.01 μm. Low resistance and no filter media to replace, so running and maintenance cost stays minimal — ideal for continuously running CNC and machining centres.
- Captures sub-micron particles down to 0.01 μm
- Output adjustable ±10% with high-voltage alarm
- IE-class motor, around 15% lower power draw
- No consumable media — washable collectors
- Modular expansion from 500 to 50,000 m³/h
- Low pressure drop, suits long central duct runs
| Model | EF500 / EF1000 / EF1800 / EF2200 / EF3500 |
|---|---|
| Air volume | 500 / 1000 / 1800 / 2200 / 3500 m³/h |
| Static pressure | 150 / 200 / 200 / on request Pa |
| Dimensions | 800×320×500 → 1530×645×860 mm |
| Inlet ø | 150 / 200 / 250 / 250 / 300 mm |
| Weight | 40 / 75 / 115 / 120 / 245 kg |
| Power supply | 220 V (EF500–EF1000) / 380 V (EF3500) |
| Power | 0.2 / 0.3 / 0.65 / 0.65 / 1.6 kW |
| Noise | 65–70 dB(A) |
| Fineness | 0.01 μm |
Industrial Collector for Emulsion Coolants
Anti-tracking electrostatic, 500–50,000 m³/h
Conductive water-based coolant films over insulators and cause high-voltage tracking — the usual failure mode of electrostatic collectors on emulsions. Insulator grooves break the water film and new-generation insulation keeps the unit stable on emulsion duty.
- Insulator grooves break the water film and stop tracking
- New-generation moisture- and voltage-resistant insulation
- Upstream cyclone and wire mesh remove bulk liquid first
- Ionise → collect → HEPA or carbon after-stage
- Modular up to 50,000 m³/h
- Built for humid, water-based coolant conditions
| Stage 1 | Cyclone separator + stainless wire mesh |
|---|---|
| Stage 2 | High-voltage ionisation |
| Stage 3 | Wet-resistant collection cells |
| Stage 4 | After HEPA / carbon (optional) |
| Air volume | 500–50000 m³/h |
| Voltage control | Output ±10%, high-voltage alarm |
Modul Centralised Oil Mist System
1–12 Modul3500 cells, 3,500–42,000 m³/h
The usual choice for heat treatment, forging and whole-shop extraction. One standard cell is 3,500 m³/h; cells combine in parallel and in tiers, feeding one duct network that serves dozens of machines.
- 3,500 m³/h standard cells, extended in parallel and in tiers
- Up to 42,000 m³/h and 312 m² collection area per array
- Central oil recovery cuts coolant loss
- One duct network, tidy plant room
| 1 × Modul3500 | 3500 m³/h ／ 26 m² ／ 750×620×710 mm |
|---|---|
| 2 in parallel | 7000 m³/h ／ 52 m² ／ 750×1240×710 mm |
| 3 in parallel | 10500 m³/h ／ 78 m² ／ 750×1860×710 mm |
| 2 × 2 | 14000 m³/h ／ 104 m² ／ 750×1240×1420 mm |
| 2 × 3 | 21000 m³/h ／ 156 m² ／ 750×1860×1420 mm |
| 3 × 3 | 31500 m³/h ／ 234 m² ／ 750×1860×2130 mm |
| 4 × 2 | 28000 m³/h ／ 208 m² ／ 750×1240×2840 mm |
| 4 × 3 | 42000 m³/h ／ 312 m² ／ 750×1860×2840 mm |
Die-Casting Fume Treatment System
Self-cleaning electrostatic with double capture hood
Die-casting release-agent fume is heavy in oil, water and dust and kills filter media fast. Five parts — capture hood, electrostatic unit, wash, fire protection and control — with a patented wet-resistant core and self-cleaning, so nothing is consumed.
- Imported German high-voltage supply with 30 years of service
- Patented wet-resistant core, consumable-free, self-washing
- Double-layer hood lifts capture rate on release agent
- Stepless fan speed to match duty
- Spark detection and automatic extinction optional
| Capture | Double hood and duct network |
|---|---|
| Cleaning | Electrostatic, down to 0.3 μm |
| Washing | Automatic wash, no media change |
| Fire protection | Spark detection and extinction (optional) |
| Controls | Stepless speed control, interlocked |
| HV supply | Imported from Germany |